chinaenglish

NEWS

CONTACT US

TeL:0086-27-83341455
Ella:0086-18702715855
Fax:0086-27-83364186
Email:sales@hasary.com
MSN:hasarylaser@hotmail.com

Laser Machine FAQ
Your current location: Home >> Laser Machine FAQ

Common sense of Laser engraving machine cutting
Published:2013-09-06 Browse: Font size[ Large medium small ]

                                                         Common sense of Laser engraving machine cutting
   Do you know how much about the laser engraving cutting machine ,lets introduction the laser engraving machine some information.
   Laser engraving carving methods can be divided into the the lattice carving and vector cutting: the lattice carved lattice carving resembles a high-resolution dot matrix print. The laser head about swinging, each carving out a line from a series of points to move up and down at the same time, and then the laser head carved out of line, and finally a full-page image or text. Scanned graphics, text and vector graphics can use dot engraving. Vector cutting and lattice different engraving, vector cutting the outer contour of the graphic. We usually use this model to penetrate the cutting timber, Senanayake Reap, paper and other materials can also be marking the surface of a variety of materials.
 
   Laser engraving machine cutting, the process is very simple, like the use of computer and printer to print on paper. You can in circumstances Win98/Win2000/WinXP using a variety of graphics software such as CorelDraw and other design scan graphics, vector illustrations and a variety of CAD files can be easily "print" to the engraving machine. The only difference is that the print coating the toner to the paper, laser engraving laser light wood products, almost all Pontiac tablets, plastic plates, metal plates, stone and other materials on top.

   The engraving speed carving speed laser head moving speed, usually with IPS (inches / sec) bring high-speed production engraving machine performance, mainly by the engraving speed, the engraving strength and spot size decision. efficiency. The speed is also used to control the depth of cut, for a specific laser intensity, the slower the speed, the greater the depth of cutting or engraving. You can use the panel to adjust the speed of the engraving machine, can also take advantage of the computers print driver to adjust. The adjustment is in the range of 1% to 100%, 1%. The Hummer machine advanced motion control system allows you to still get high-speed carving, engraving quality engraving hyperfine strength carving intensity refers to the incident on the intensity of the laser at the material surface. For specific engraving machine speed, the greater the intensity, the greater the depth of cutting or engraving. You can use the panel to adjust the intensity of the engraving machine, can also take advantage of the computers print driver to adjust. The adjustment is in the range of 1% to 100%, 1%. The greater the intensity, the greater the equivalent speed. The depth of cut is also deeper spot size of the beam spot size can make use of different focal lengths of the lens is adjusted. Small spot lens for high-resolution engraving. Spot lens for lower resolution carving, but for vector cutting, it is the best choice. The standard configuration of the new device is a 2.0-inch lens. The spot size in the middle, for various occasions.

   General laser engraving machine can engrave the following materials: wood products, plexiglass, metal plates, glass, stone, crystal, Corian, paper, color plates, alumina, leather, resin, spray metal and so on.

『 Pre』 How to use laser engraving machine     『Next 』 Safety matters of laser engraving machine

在线客服
在线客服系统