Laser Machine FAQ
Your current location: Home >> Laser Machine FAQ

Laser engraving machine for wood
Published:2013-10-18 Browse: Font size[ Large medium small ]

Laser engraving machine for wood

Laser machine processed on wooden materials
Wooden engraving is usually used in die-boards, wood models, wood joint boards, engraving clothes rack, wood photo frame, and others. Wood plates are classified into plywood, solid wood, MDF and the plywood is the widest application. Usually, plywood includes three specifications: 3mm, 5mm and 7mm. all these materials can be cut. The normal speed to breakdown 3mm plywood is 1.2 meters per second and some solid wood can be cut to 25mm. Details are determined by actual situation. Addition with strong water pump or water compressor, the effect will be better. Usually, the thickness of wood model is below 3mm and the speed is 1.2 meters per second. Wood joint boards are usually cut with double focus mirrors and choice of RF laser diode is advised for customers of high requirements for its exquisite beam spot and incision. Small area engraver is advised for clothes rack engraving. The speed is determined by the size of the wood plate to be engraved and the effect to be achieved. For dark engraving effect, defocus engraving can be employed. The power of the water pump will influence the degree of burning.

『 Pre』Working Principle of Laser Engraving Machine     『Next 』Laser cutting machine for textile